Basic Operation - Panasonic VL-V900 Quick Reference Manual

Basic operation

Enter the room number with the keypad → {
Other operation
At the lobby station
Searching by first letter of the name
1 Press { } → use the keypad to enter the first letter of the resident's name.
2 Press { } or { } to search for the desired name.
3
Press { } to call.
Opening the door by entering an unlock code
1 Press {#} → enter the 4-digit unlock code.
L For information about unlock code, please contact your building manager.
2
Press { } to unlock.
Switching the image displayed on the main monitor station
While talking to the main monitor station, press {#} to switch the image displayed on the main monitor station
from the lobby station to the camera. To return to the lobby image, press { }.
At the main monitor station
Monitoring the lobby station or camera image
1
Press {MONITOR}.
2
Press {VOLUME} ( ) or {PAGE} (▲) to select the desired destination → {MENU} (OK).
L If a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing {MONITOR}.
Opening the door
You can open the lobby door while talking or monitoring the lobby station image. Press {DOOR KEY} to open the door.
Calling the PBX extension
1
Press {TALK}.
2
Press {VOLUME} ( ) or {PAGE} (▲) to select the desired destination → {MENU} (OK).
Please note the following system conditions and limitations.
L Only one call or monitoring session can be handled at a time.
Low priority: Monitoring
Medium priority: General calls (lobby station to main monitor station, main monitor station to PBX extension, etc.)
High priority: Emergency calls (Available for certain system configurations only. Not available for VL-MW251.)
L All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
L Following features are not available for the lobby station:
– Door station connection settings
– Door key settings
– Automatic illumination settings
L In order to perform the above operations, optional devices and configuration for those devices are required.
Contact your building manager for more information.
When the ringer tone is heard, press {TALK}.
}.
L Confirm the caller before answering.