Sanyo MCH-900F Instruction Manual page 16

RECORDING FROM A COMPACT DISC
~ynchronous recording
(CD-to-TAPE SYNCHRO RECORDING)
This recording system starts disc play and cassette
recording at the same time.
- For programmed recording, program the material in
advance (as described under''PROGRAMMED PLAY").
1. Set the FUNCTION switch to CD.
FUNCTION
CD7~1} TAPE
mr)
3. Press the DISC SELECTOR buttons to select the disc
to be recorded.
For programmed recording, this step is unneces-
sary.
4. Press the REC button.
The PLAY button will lock down at the same time.
Recording begins automatically.
REC PLAY
w
b
5. Press the STOP/EJECT button to stop recording at any
time.
When the end of the tape is reached, the CD changer
and deck will stop at the same time.
2. Load a disc into the CD changer as described under
"Loading discs".
STOP/EJECT
!?
:
MIC-MIXING
1
It is possible to mix microphone input (microphone not supplied), with the sound from the radio, tape or CD.
Mixing playback Mixing recording
1.
2.
3.
4.
Corinect the microphone to the MIC socket.
1. Perform the steps for mixing playback.
Turn on the power so that the microphone is live. 2. Load a cassette for recording into the cassette com-
Select the desired music source with the FUNCTION partment lid.
switch. 3. Set the deck to record.
Adjust the overall volume of the microphone and the
mixing source using the VOLUME control. (The micro-
phone level cannot be adjusted separately.)
-15-