Dwyer Instruments IR2 series Manual

The Series IR2 Infrared Temperature Thermometer allows users to
economically take accurate measurements in hard to reach areas.
Measurements can be taken at a safe distance with a 12:1 Distance to
Target Ratio. The IR2 easily takes measurements within 2% accuracy
using a built-in laser sighting. The fixed emissivity of 0.95 is perfect for
measuring surface temperatures of concrete, asphalt, rubber, or
oxidized metals. Besides reading the process temperature, the back lit
display will also read the maximum temperature captured during scan.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Series IR2 Infrared Non-Contact Thermometer
12:1 Distance-to-Target Size, Laser Sighting
1-35/64
(39.29)
SPECIFICATIONS
Measurement Range: -76 to 932°F (-60 to 500°C).
Accuracy: 2% of reading or 4°F (2°C) whichever is greater.
Emissivity: 0.95 fixed.
Distance to Target: 12:1.
Resolution: 0.1°F/0.1°C.
Response Time: 1 sec.
Operating Range: 32 to 122°F (0 to 50°C).
Average Battery Life: 180 hours of continuous use, (2) AAA batteries
included.
Weight: 3.61 oz (179 g).
Dimensions: 6.90 x 1.54 x 2.83 in (175.2 x 39.0 x 71.9 mm).
OPERATING INSTRUCTIONS
Simply aim thermometer at the target and press the "MEAS" key to
display the surface temperature.
°C or °F: Press the "MODE" key to switch between °F and °C.
Backlight: LCD Backlight always on.
Laser: Class II Laser: always enable while measuring.
Phone: 219/879-8000
Fax: 219/872-9057
Bulletin T-10-IR2
6-15/16
(176.21)
5-7/8
(149.23)
www.dwyer-inst.com
e-mail: info@dwyermail.com