Test Mode - Samsung F1015JGB/YLP Service Manual

9. Test Mode

1. Driving Compartment Test Mode
A. Hold down " 1" and " 2" keys simultaneously and then press POWER S/W " 4" on.
(Whole lamps turn on and display show " tl" after 3 Seconds.)
B. The driving compartment can be tested when you press " 3" key right after entering
into the initial stage of the TEST MODE.
• Driving Compartment Test
Pre-wash VALVE ON(0.3sec) → OFF(0.3sec) → COLD VALVE ON(0.3sec) → [OFF(0.3sec) →
HOT VALVE ON (0.3sec) :
Pump MOTOR ON(0.3sec) → OFF(0.3sec) → MOTOR Left (0.5sec) → OFF(0.5 sec) →
MOTOR Right (0.5sec) → OFF(0.3sec) → HEATER RELAY ON(0.3sec) → OFF(0.3sec) → DOOR OPEN
(Function continues when door is closed)
2. THERMISTOR TEST MODE
A. Hold down " 1" and " 2" keys simultaneously and then press POWER S/W " 4" on.
(Whole lamps turn on and display show " tl" after 3 Seconds.)
B. Press the " 1" key and display shows " t2"
C. Press the " 3" key and display shows the inside temperature of tub.
] → OFF(0.3sec) → Rinse VALVE ON(0.3sec) → OFF(0.3sec) →
OPTION
F1215J/F1213J/F1015J/F1013J F1215J/F1213J/F1015J/F1013J
22