Table of Contents
Advertisement
12. Setting up a wash machine.
3) Even though adjustment legs came out all the way, if machine is not levled , prop up the
machine with the wood or brick to make it even.
(Do not use fragile material or slippery material such as laminated paper)
12-2-2 The condition of setting up sink( Disassembled Ass'y- Cover Top)
1) Spin the adjustment leg to the left and remove them from the front and rear side of the machine.
2) Remove the 4 locking nuts from adustment legs, and put only adjustment legs back whert those were.
3) After removing the fixing screws(each on right, left side) from the machine whichi is behind ass'y- cover
top, disassemble the assy-cover top.
4) Install the sink.
598
598
30
404
404
Hide quick links:
Advertisement
Table of Contents
