EMX DTM-9 Operating Instructions Manual
7 day programmable timer
Hide thumbs
Also See for DTM-9:
- Operating instructions manual (8 pages) ,
- Instruction manual (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for EMX DTM-9
Summary of Contents for EMX DTM-9
- Page 1 DTM-9 7 D A Y P R O G R A M M A B L E T I M E R 4564 Johnston Parkway, Cleveland, Ohio 44128 P. 800 426 9912 F. 216 518 9884 Sales Inquiries: salessupport@emxinc.com Technical Support: technical@emxinc.com...
-
Page 2: Table Of Contents
Contents Caution and Warnings Indicators, Controls, and Connections Specifications Operation Installation Ordering Information Warranty DTM-9 Instructions Rev 1.3 Date 05/03/2017... -
Page 3: Caution And Warnings
Power in ground or negative Relay output Normally Closed Relay output Common Relay output Normally Open On Activation terminals 1 and 2 will close completing the circuit. The red LED will illuminate indicating that the relay has activated DTM-9 Instructions Rev 1.3 Date 05/03/2017... -
Page 4: Specifications
-40 to 170 Degrees Fahrenheit Connector Isolated Screw Terminal strip with 5 connections Activation Indicator Red LED when relay is activated Mounting DIN rail and flush mount bracket supplied Surge Protection MOV protection device Memory Rechargeable back-up battery DTM-9 Instructions Rev 1.3 Date 05/03/2017... -
Page 5: Operation
13:00 2 pm 14:00 3 pm 15:00 4 pm 16:00 5 pm 17:00 6 pm 18:00 7 pm 19:00 8 pm 20:00 9 pm 21:00 10 pm 22:00 11 pm 23:00 12 midnight 24:00 DTM-9 Instructions Rev 1.3 Date 05/03/2017... -
Page 6: Dtm-9 Instructions Rev
Operation (continued) DTM-9 Instructions Rev 1.3 Date 05/03/2017... -
Page 7: Installation
Note: Battery life will be reduced if unit is powered off repeatedly each night. Unit must be turned on and powered up to operate, the DTM-9 cannot run off of the memory back-up battery. Install timer away from inductive loads. Inductive loads must have MOV or ... -
Page 8: Ordering Information
EMX Industries option of a part or parts found not conforming to the warranty. In no event shall EMX Industries Inc. be liable for damages, including but not limited to damages resulting from non-conformity, defect in material or workmanship. - Page 9 BLANK PAGE DTM-9 Instructions Rev 1.3 Date 05/03/2017...
- Page 10 4564 Johnston Parkway Cleveland, Ohio 44128 United States of America www.emxinc.com Technical Support: (216) 834-0761 technical@emxinc.com Sales: (216) 518-9888 Fax: (216) 518-9884 salessupport@emxinc.com DTM-9 Instructions Rev 1.3 Date 05/03/2017...
Need help?
Do you have a question about the DTM-9 and is the answer not in the manual?
Questions and answers