Conventions; Parts And Service; Modifications; Safety - Clarke CA90 32T Service Manual

Floor scrubber

Hide thumbs Also See for CA90 32T:

Table of Contents

Service Manual – CA90 32T

General Information

Conventions

Forward, backward, front, rear, left or right are intended with reference to the operator's position. That is to

say, in the driving position, holding onto the handles on the control housing.

Repairs should be performed by an Authorized Nilfisk Service Center that employs factory-trained service

personnel and maintains an inventory of Nilfisk original replacement parts and accessories.

Call the Nilfisk Dealer for repair parts or service. Please specify the Model Number (same as the Part

Number) and Serial Number when discussing your machine.

Modifications and additions to the cleaning machine which affect capacity and safe operation shall not be

performed by the customer or user without prior written approval Nilfisk Inc. Unapproved modifications will

void the machine warranty and make the customer liable for any resulting accidents.

The following symbols indicate potentially dangerous situations. Always read this information carefully,

and take all necessary precautions to safeguard people and property.

The Clarke CA90 32T is a battery powered, walk-behind scrubber. It is a heavy duty machine built and

designed to clean large open areas of hard surface flooring. It is equipped with a gravity feed solution

system for dispensing cleaning solution onto the floor, (2) rotating brush motors for scrubbing, and a

recovery system for removing the dirty solution from the floor.

Table of Contents