Advertisement
The Panel Controller (Figure.8)
Power off: Power on/off power supply, the same knob controls Volume.
MODE Switch: Three modes. DISC,ALL METAL and TONE.
SENS: Is used to adjust the detector's sensitivity. It is appropriate to reduce the
sensitivity when there is metallic interference.
DISC/TONE: Rotate the control clockwise from 0 to 10, the detector may reject
the objects that you don't want in order. in the "0" position, the unit will respond
to any metal objects. While in the "10" position, the unit will reject most metal
objects, it will only respond to the highest conductivity silver metal.
When the MODE switch is in the DISC mode or TONE mode, it discriminates.
While in the ALL METAL mode, it does not discriminate and DISC and TONE are
useless.
VOLUME: Is used to adjust the loudness of the speaker.
LOW BATT: When the red LED lights, indicates the user should replace the
batteries.
Target Button: Press and hold the red Target Button, the detector mode will
convert from motion mode to no-motion mode, and the detector won't
discriminate objects any more. At this time, as long as the search coil approaches
the metals slowly, the detector will respond. The closer the distance is, the louder
the sound will be. It may help to pinpoint the target position.
Earphone Jack: When the earphone is plugged in, the speaker will no longer
sound.
Panel And Controller
Figure.8
Advertisement
