Advertisement
Assembly
1.
Turn clockwise to loosen the end of tube sleeve, and insert the tube which connects to the
search-coil in the sleeve. Adjust the length, so you can stand comfortably and straighten your arms.
Lock the sleeve counter-clockwise when the search-coil is 1/2 inch from the ground.(See fig.1 and
fig.2)
2. Attach the control console with two nuts on the bottom of detector arm. Align the control
box's two holes with two holes of the bend shape tube, and lock with bolts. (See fig.3)
3. Coil the cable of the search-coil around the tube pole, keep slightly loose. So that the cable
won't sway, and then insert the cable plug into the lower right socket of the control box.(See
fig.4)
4.
The arm support corbel has two positions. The initial corbel location is the longer position. If
your arms are shorter, such as women, children, you can adjust the corbel position. Please loosen
and remove the left and right screw under of the corbel. So that the left and right corbels are loose.
Adjust the corbel forward to another position. And then replace and tighten the two screws.(See
fig.5)
Fig2
Fig3
Fig4
Advertisement
