Page 1
OPERATING MANUAL BAK Thermoplastic Welding Technology AG...
Page 2
BAK devices may never be reconfigured and/or modified. BAK reserves the right to deny any responsibility if this is ignored. No liability can be assumed by BAK for incorrect installation and/or use as well as natural wear and tear of components (e.g.
INTENDED USE The LarOn H is an automatic welding machine for overlap welding of roofing membranes made of PE, PVC, TPO, ECB, EPDM, CSPE and bitumen. The machine can also be used in areas close to edges and on uneven surfaces.
On switching position AUTO the drive starts only after sliding the nozzle into the welding seam and stops immediately after taking out the nozzle. To separate the automatic welding machine from the electric system, change the main switch to “OFF” und unplug the mains plug. BAK Thermoplastic Welding Technology AG...
ASSISTANCE AND SUPPORT The BAK group and its authorised service centres offer free support and assistance in the area of applications technology. Our specialists will be pleased to help you. Customer service and orders: BAK Thermoplastic Welding Technology AG Industriestrasse 6...
50 / 60 Frequency Power consumption 4100 / 6000 30 – 620, stepless adjustable Temperature °C 0.5 – 20, stepless adjustable Drive m/min Weight 610 x 410 x 320 Size LxWxH Mm (LxBxH) Protection of class 1 BAK Thermoplastic Welding Technology AG...
Need help?
Do you have a question about the LarOn H and is the answer not in the manual?
Questions and answers