17
Disassembly
Disassembly
To remove fascia panel to access control module & dispenser, remove (4) T-20 Torx
front/side screws and lift panel up.
fingernails or a sharp knife – take care not to scratch fascia panel or caps.
R020031E
–
Fascia (Control) Panel (1)
–
Fascia (Control) Panel (1)
T-20 screws
Caps over screws can be removed using
When reassembling
panels,
tuck rear
tabs
under
top
panel 1
st
.
/
Knobs are permanently attached
to
panels
and
cannot
removed.
2nd Edition/Revision 0 (4/28/04)
be