Related Manuals for ADIATEK diamond 100s
Summary of Contents for ADIATEK diamond 100s
- Page 1 100s 07 2015 Use and maintenance Attention! Please read the instructions before use.
-
Page 3: Table Of Contents
SUMMARY Working in manual mode Side brush LEGEND PANEL OF CONTROLS Working adjustments LEGEND MACHINE Flow adjustment of the detergent solution TECHNICAL DESCRIPTION Adjustment of the brushes pressure INTRODUCTORY COMMENT Electric protection GENERAL RULES OF SECURITY Overflow device SYMBOLOGY STOP OF THE MACHINE AFTER CLEANING OPERATION OPTIONAL ACCESSORIES DAILY MAINTENANCE BEFORE USE... -
Page 4: Legend Panel Of Controls
LEGEND PANEL OF CONTROLS DISPLAY VISUALIZATION 14. SELECTOR UP/DOWN BRUSHES PUSH BUTTON VISUALIZATION HOUR METER (DISPLAY) 15. SELECTOR UP/DOWN SQUEEGEE PUSH BUTTON VISUALIZATION BRUSHES PRESSURE SET (DISPLAY) 16. SWITCH SUCTION MOTORS ADJUSTMENT SELECTOR BRUSHES PRESSURE 17. SIGNAL LAMP PARKING BRAKE ON KEY SWITCH 18. -
Page 5: Technical Description
TECHNICAL DESCRIPTION diamond 100s Cleaning width 1000 Squeegee width 1300 Working capacity, up to sqm/h 7000 Diameter front cylindrical brush Diameter rear cylindrical brush Diameter side brush Front brush rpm Rear brush rpm Side brush rpm Pressure on the cylindrical brushes... -
Page 6: Symbology
SYMBOLOGY Symbol denoting the switch for Symbol denoting the Symbol denoting the push the water opening and the functioning of the adjustment button of the horn. signal lamp that the water is selector of the brushes open. pressure. Symbol denoting the Symbol denoting the signal functioning of the solution lamp of low detergent solution. -
Page 7: Before Use
BEFORE USE ATTENTION: ATTENTION: HANDLING OF THE PACKED MACHINE Never charge a GEL battery with a non suitable Strictly follow manufacturer/distributor indications recharger. Strictly follow the instructions sup- The machine is supplied with suitable packing fore- for the maintenance and recharge of the batteries. plied by the batteries and recharger manufactur- seen for fork lift truck handling. -
Page 8: Hour Meter
HOUR METER 3. The batteries charge level indicator is digital and remains fixed on the display. The battery charge level The machine is equipped with an hour meter located starts from 100, which indicates the 100% of the to- on the same display (1) of the battery charge level tal charge and decreases from 10 to 10. -
Page 9: Side Brush Assembly And Disassembly
ATTENTION: The brushes must be inserted easily without using tools in order not to damage or force them. Use only brushes supplied with the machine or the ones indicated in the paragraph “RECOMMENDED BRUSHES”. The use of other brushes can compromise the good washing result. -
Page 10: Detergent Solution Tank
DETERGENT SOLUTION TANK The capacity of the detergent solution tank is indi- cated in the technical data. Open the screw plug placed in the left part of the machine and fill the detergent solution tank with clean water at a maximum temperature of 50°C. Add the liquid detergent in the percentage and condi- tions foreseen by the manufacturer. -
Page 11: Emergency-Parking Brake
tomatic mode all the working functions are activat- Activate the machine (see under paragraph “START- ING OF THE MACHINE”) positioning the selector (12) ed. In fact, automatically both the brushes base as the squeegee go down, the brushes begin to turn, to the right to choose the manual mode (MAN). -
Page 12: Side Brush
ADJUSTMENT OF THE BRUSHES PRESSURE Both in automatic as in manual mode it is possible through the selector (4) to adjust the brushes pres- sure on the floor in eight established levels. During the operation, we can visualize on the display (1) the value in percentage of the electric absorption of the brushes motor by pressing the button (3). -
Page 13: Stop Of The Machine After Cleaning Operation
DAILY MAINTENANCE tion, the switching on of the signal lamp (20) for the signalling of the full recovery tank and consequently to the drying stop. ATTENTION: When this happens, it is necessary to empty the re- covery tank (see under paragraph “RECOVERY TANK All the maintenance and cleaning operations that refer to the following components that are in con- EMPTYING AND CLEANING”). -
Page 14: Suction Filter Cleaning
BRUSHES CLEANING 6. Open the door (2). Disassemble the brushes and clean them with a wa- CHECK OF THE SIDE RUBBERS 7. Extract the box holding its handle (3). For its ter jet (for the brushes disassembly see under para- handling, it is convenient to use the two wheels pre- graph “BRUSHES ASSEMBLY AND DISASSEMBLY"... -
Page 15: Two-Monthly Maintenance
CHECK OF THE BRAKES 5. Rinse with a water jet the solution tank and the components of the filter. Check the braking efficacy of both rear wheels. 6. Reassemble all parts. Should the braking be insufficient, please contact NOTE: in case of need it is possible to wash only the the authorized technical assistance. -
Page 16: The Water Does Not Come Down Onto The Brushes Or Is Insufficient
THE MACHINE DOES NOT CLEAN PROPERLY 1. The brushes do not have the suitable bristle di- mension: contact the authorized technical assistance. 2. The brushes have got worn bristles. Check the brushes wear condition and eventually replace them. To replace the brushes, see instructions under para- graph “BRUSHES DISASSEMBLY”... -
Page 17: Programmed Maintenance
This may also happen with thicker bristles creating brush vibration. MACHINE CODE QUANTITY DESCRIPTION diamond 100s 48907050 Cylindrical brush PPL 0,5 Ø 150 Smooth floors with small joints and persistent dirt. 48907060 Cylindrical brush PPL 1 Ø 280 Smooth floors with small joints and persistent dirt.
Need help?
Do you have a question about the diamond 100s and is the answer not in the manual?
Questions and answers