Bissell POWERCLEAN Multi Cyclonic 16N5 Series User Manual page 17

g
Vacuum cleaner is difficult to push
Possible causes
1. Incorrect height setting
Visible dust escaping from cleaner
Possible causes
1. Filter door and orgasket missing
ornot i nstalled propedy
2. Foam filter m issing ornot i nstalled propedy
3. HEPA filter c artridge missing ornot i nstalled propedy
4. Dirt c ontainer not i nstalled propedy
5. Dirt c ontainer not a ssembled properly
6. Hose n ot i nstalled propedy
Remedies
1. Turn dial tohighersetting
Remedies
1. Check filter door and g asket
2.
3.
4.
Check foam filter f orcorrect installation
Check HEPA filter c artridge forcorrect installation
Make s ure dirt c ontainer iscorrectly positioned and snapped
into place
Check screen, upper and lower portions ofthedirtcontainer
forproper assembly
Make s ure hose w and i sfully seated inbase, and thatthe
hose i sassembled corre_y t otheunit. See page 5 .Also
make s ure foot h ose i spropedy attached todiverter area
7. Hole orcrack inhose 7. Check hose f orholes orcracks and replace if needed
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
[ Please do not return this product to the store. ]
For any questions or concerns, BISSELLis happy to be of
service. Contact us directly at 1-800-237-7691.
17
www.bissell.com _+, 800.237.7691