Bissell POWERCLEAN Multi Cyclonic 16N5 Series User Manual page 11

ntenance and care
Replacin_l the HEPA filter cartrid_le
The HEPA filter cartridge should be
replaced if machine performance is
n6tlceably declining. More or less .
trequent replacing may be required
bas_l on individual vacuuming habits
and types of debris picked up.
Note: To have the benefits of
the Airetighte HEPA System,
y.pu must u_e the BISSELL HEPA
filter cartridge.
1. Remove the dirt container.
2. To remove the HEPAfilter cartridge, push
in on the front of the filter door to unlatch.
Lift up to access.
3. To check or remove, unscrewthe center
screw.
4. If necessary,replace the used HEPA
filter cartridge with a new one.
Note: To avoid dam.aging
the HEPA filter cartridae
and reducinaits filtration
capqbi!ities.,'be careful .not to
touch the filter material. The
HEPA filter cartridge is not
washable.
5. To ensure a tight seal be sure to
tighten the filter cartridge screw until
snuq.
DO-NOT OVER TIGHTEN.
Make sure the filter door latches
completely.
2,
3,
11
ww w. b i s se II .co m ;_, 800.237.7691