Bissell POWERCLEAN Multi Cyclonic 16N5 Series User Manual page 10

ntenance and care
Cleaning the dirt container
Additional steps can be taken to clean
the dirt container as necessary.
1. Ensure the dirt container has been
emptied.
.
3.
Remove the lower portion by pressing the
front latch on the upper portion as shown.
Clean the screen with a cloth or soft brush
to remove dust or debris.
.
.
If desired, the lower dirt container may be
washed in warm water. Make sure it is
completely dry before reassembling.
Do not put in dishwasher
To reassemble, hold the carry handle and
place the upper portion into the lower
portion, lining up the front and back
latches. Push down until both latches click
into place. Make sure the dirt container is
securely assembled before replacing it on
machine.
/ WARNING:
To reduce the risk of
electric shock,turn power
switch OFFand disconnect
polarizedplug from electri-
cal outlet before performing
maintenance or
troubleshootingchecks.
2,
5,
Cleaning_ the pre-motor filter
The pre-motor filter should be checked
monthly and washed as needed to
maintain performance. More or less
frequent cleaning may be required
based on individual vacuuming habits
and types of debris picked up.
1. The filter is located in the door labeled
"Filter" behind the dirt container. Push the
tab at the top and swing the door down
to access.
.
Remove foam filter and hold under
running water to wash. Mild detergent
may a|so be used if desired. Wring
excess water from filter.
Air dr_ thoroughly before
replacing.
/ WARNING:
Donotoperate thecleaner with a
damp orwet filter o r
without all
thefilters in place.
10
www.bissell.com y_, 800.237.7691