Audio Menu; Sound Preset Mode; Sound Logic; Balance - RCA HDLP50 User Manual

Main Menu
0
Go Back
The Audio menu has screens for setting the audio features
and for tweaking the sound:
1
Picture Menu

•Sound Preset Mode

2

Audio Menu

•Sound Logic

3
Channel Setup

•Balance

4 •Advanced Audio
Setup Options
Press OK or4to access the Audio menu.
4
Main Menu Audio Menu
0
Go Back
Standard
+12
1 Music
Sound Preset Mode
Voice
2
Sound Logic
Video Camera
3
Balance 0 dB
Personal
4
Advanced Audio
-12
For each input select a different equalizer preset or create a
Personal preset with the equalizer. Press OK to continue.
Chapter 4
Using the TV's Menu System
Audio Menu
The Audio menu lets you adjust audio output. To access the Audio menu, press MENU on
the remote, and then select Audio from the main menu. The following audio items can be
adjusted: Sound Preset Mode, Sound Logic, Balance, and Advanced Audio.
Sound Preset Mode
Standard Preset Settings
You can select one of the seven-band Sound Preset Modes or create your own personal
preset. The seven-band graphic equalizer lets you adjust the audio frequency settings. The
equalizer can only be changed if Fixed/Variable Out is set to Variable Level, Speakers On
in the Advanced Audio menu. If Fixed/Variable Out is set to Fixed Level, you cannot make
7 5 3 0 1 2 3
120 200 500 1.2 3 7.5 12 changes to the equalizer and the bands are set to 0dB. However, the graphic equalizer
Hz Hz Hz kHz kHz kHz kHz
levels for Variable Level, Speakers On are stored in memory in case you switch from Fixed
Level back to Variable Level, Speakers On.
Sound Logic
Acting like a dynamic range limiter, it compresses the dynamic range to limit sudden
volume increases (for example, the sudden increase in volume you sometimes hear when a
commercial starts). Choose On or Off, depending on your preference.
Balance
The Balance setting applies to the internal speakers and the headphone output. Balance is
how much audio (loudness) gets sent to the left and right speakers.
Note: Sound Preset Modes are stored for each input. All other audio feature settings
are stored globally across all inputs and not per input.
Note: Balance applies if Fixed/Variable Out is set to Variable Level, Speakers On. See
the following page for more information.
53