RCA HDLP50 User Manual page 17

Composite cables are color coded-
Yellow= video; Red= right audio; white=
left audio
TV button
ON•OFF
SAT•CABLE TV
VCR DVD
AUDIO AUX
GUIDE ANT•CABLE
INPUT
FORMAT
INFO
INPUT
CLEAR
MENU
button
GO BACK
VOL CH
MUTE
INPUT
SUBCHANNEL SKIP
button
PLAY
REVERSE FORWARD
RECORD STOP PAUSE
CC PRESETS SOUND
Use these buttons to view the picture
of the device connected to the TV. Your
remote model varies according to the
model of TV you have.
Chapter 1
Connecting the Device
Red
.
This connection allows you to connect a device such as a VCR that has audio/video
Yellow
outputs.
White
Using the example of a VCR:
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect your composite audio/video cables to the TV's input.
Connect composite audio/video cables to the TV's INPUT 2 jacks (R and L-Audio,
and Video) and to the VCR's audio/video outputs..
TV button
Viewing the Picture from the Connected Device
The device in this connection is connected to the INPUT 2 jacks. To view this device:
ON•OFF
1. Turn on the TV and the device you want to view.
SAT•CABLE TV
AUX DVD
GO BACK
2. Press the TV button on the remote control to put the remote in TV mode.
VOL CH
MUTE
3. Press the INPUT button on the remote control to scroll through the Video Input
GUIDE INFO
Channels until you see INPUT 2 in the channel banner. See picture below for
SUB
FORMAT
CH
location.
MENU CLEAR
Note: You can set up the TV to automatically tune to the correct device you want
to view. This is called Auto Tuning. See Chapter 3 for more information on Auto
INPUT ANT•CABLE
Tuning.
REVERSE PLAY FORWARD
RECORD STOP PAUSE
Input channel appears here
Program Title/Acquiring Channel
Input 2
Connections & Setup
• If you are done
connecting devices to
your TV, go to page 19
to complete the Assisted
Setup.
• To continue connecting
devices, go to the next
page.
12:39 PM
15