Table of Contents
Advertisement
Using the TV's Menu System
Menus, On-screen Help, and Control Panels
This section highlights your TV's on-screen menu system. The menu system has several types of screens. An
overview follows.
Note: The Parental Controls menu items is discussed in the Features chapter, while Assisted Setup is
discussed in the Connections and Setup chapter.
Main Menu
0
Go Back
The Audio menu has screens for setting the audio features
and for tweaking the sound:
1
Picture Menu
•Sound Preset Mode
2
Audio Menu
•Sound Logic
3
Channel Setup
•Balance
4
•Advanced Audio
Setup Options
Press OK or4to access the Audio menu.
Tips
A shortcut method to access a menu item is to press
the number button on the remote that matches the
number next to the on-screen menu. For example, in
the Main Menu, press 2 to go straight to the Audio
menu.
Feel free to explore the menu system. If you're ever
unsure where you are in the menu system, look at
the menu path at the top (for example, Main Menu,
Picture Menu) or if you're just tired of exploring,
press CLEAR to remove the menus from the screen
and start over again.
Menu path
4
Channel Setup
Advanced Settings
0
Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Auto Tuning
VCR
Front Input
2
Startup Channel
VCR2
3
Diagnostic Info
Not Connected
DVD
4
CableCARD Tools
Input 2
5
CableCARD Reset
SAT-CABLE (Satellite/Cable Box)
HDMI
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
Highlighted menu
selection
48
Navigating the Menu System
The fi rst menu you see when you press the MENU button on the remote is called the
Main Menu. To use the Main Menu:
1.
Press the MENU button (the Main Menu appears).
2.
Use the arrow buttons (left, right, up, down) to move through the menu and
highlight different options.
3.
Press the OK button to select a highlighted item.
Note: Press the number button on the remote that matches the number next to the
on-screen menu to select the option.
To exit the Main Menu:
•
Press CLEAR. The on-screen displays are cleared from the screen and you return to
TV viewing.
•
Press MENU.
•
Press 0 (Go Back) or GO BACK on the remote.
On-Screen Help
Information appears on most screens to assist you in understanding your menu selection.
To the right of the highlighted menu item is a display area that might provide text for the
AUDIO (Audio Receiver/Amp)
item selected along with any submenu items. In addition, a menu path appears at the top
Not Connected
RCA SAT2
of the screen to let you know where you are in the menu system. At the bottom of the
Not Connected
screen are two lines of help text that explain the currently highlighted item.
Controls
Controls let you adjust the default settings of your TV. You can choose a setting, enter a
Help text
number, or adjust a level such as tint or brightness. There are four types of controls:
•
Sliders
•
Choice lists (check boxes, radio buttons)
•
Alpha/numeric entries
•
Menu (action, choice fi elds)
Chapter 4
Advertisement
Table of Contents
