Programming The Remote To Operate Other Devices; Find Out If You Need To Program The Remote; Programming The Remote - RCA HDLP50 User Manual

Using the Remote Control
ON•OFF
SAT•CABLE TV
AUX DVD
GO BACK
VOL CH
FORMAT
MUTE
GUIDE INFO
SUB
FORMAT
CH
MENU
CLEAR
ANT•CABLE
INPUT
REVERSE PLAY FORWARD
RECORD STOP PAUSE
Remote model
R401A1
The darkened buttons are the device buttons
that can be programmed.
ON•OFF
SAT•CABLE TV
AUX DVD
GO BACK
VOL CH
MUTE
GUIDE INFO
SUB
FORMAT
CH
MENU CLEAR
INPUT ANT•CABLE
REVERSE PLAY FORWARD
RECORD STOP PAUSE
You'll use these darkened buttons for Direct
Entry.
30
Programming the Remote to Operate
ON•OFF
Other Devices
SAT•CABLE TV
VCR DVD
The universal remote can be programmed to operate many brands of remote-controllable
AUDIO AUX
VCRs, audio devices, DVD players, cable boxes, satellite receivers and other devices. In
GUIDE ANT•CABLE
INPUT
addition to being programmed to operate your television, it's already programmed to
INFO
operate some RCA devices.
A second and third RCA TV can be programmed to any device button, except the TV
CLEAR
MENU
button.
GO BACK
Notes: The TV button can't be programmed on this remote to control any device; it
VOL CH
controls only this TV.
MUTE
The remote may not be compatible with all models of all brands of devices. It also
may not operate all functions of your device.
SUBCHANNEL SKIP

Find Out If You Need to Program the Remote

REVERSE PLAY FORWARD
To determine whether the universal remote needs to be programmed to operate one of the
devices connected to your TV, such as a VCR, do the following:
RECORD STOP PAUSE
1. Turn on the device (in this example, a VCR).
CC PRESETS SOUND
2. Point the remote at the device.
Remote model
R602A1 3. Press the corresponding device button (in this example, VCR).
4. Press ON•OFF to see if the VCR responds. If the VCR doesn't respond, you need to
program the remote to operate it.

Programming the Remote

ON•OFF
There are three ways to program the remote control to operate other devices: Direct
Entry, Manual Code Search, and Automatic Code Search. If you have recently purchased
SAT•CABLE TV
VCR DVD
the device you want to control or if the device has many codes, you might want to try the
AUDIO
AUX
manual code search fi rst.
GUIDE ANT•CABLE
INPUT
FORMAT
INFO
Using Direct Entry
1. Turn on the device you want to control.
CLEAR
MENU
GO BACK
2. Look up the brand and code number(s) for the device in the code list at the end of
VOL CH
this section.
MUTE
3. On your remote control, simultaneously press and hold the ON•OFF and MUTE
buttons (approximately 3 seconds) until a device button remains lit. Then release the
buttons.
4. Press and release the device button (SAT•CABLE, VCR, DVD, AUX or AUDIO)
SUBCHANNEL SKIP
you want to program.
REVERSE PLAY FORWARD
5. Enter a three digit code from the code list.
RECORD STOP PAUSE
CC PRESETS SOUND
Chapter 2