RCA HDLP50 User Manual page 15

Green
Component Video
cables (Y Pb Pr) are
color coded- Green,
Blue and Red
Audio cables are color
coded- Red= right audio;
white= left audio
TV button
ON•OFF
SAT•CABLE TV
VCR DVD
AUDIO
AUX
INPUT GUIDE ANT•CABLE
FORMAT
INFO
INPUT
MENU CLEAR
button
GO BACK
VOL CH
MUTE
INPUT
SUBCHANNEL SKIP
button
REVERSE PLAY FORWARD
RECORD STOP PAUSE
CC PRESETS SOUND
Use these buttons to view the picture
of the device connected to the TV. Your
remote model varies according to the
model of TV you have.
Chapter 1
Connecting the Device
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a
Blue
DVD player. If the device you are connecting also has S-Video or composite video, we
Red
recommend you use the component video input for better quality.
Using the example of a DVD player:
1. If necessary, connect your cable and/or off-air antenna as described on page
9.
2. Connect your Y Pb Pr component video cables.
Connect three video cables or component video cables to the INPUT 1 Y/VIDEO
P
Red
3. Connect your audio cables.
White
Connect the audio (white and red) cables to the INPUT 1 R and L Audio jacks on
the back of the TV and to the Audio Output jacks on the DVD player.
Viewing the Picture from the Connected Device
TV button
The device in this connection is connected to the TV's INPUT 1 jacks. To view this
ON•OFF device:
SAT•CABLE TV
AUX DVD
1. Turn on the TV and the device you want to view, for example a DVD player.
GO BACK
VOL CH
2. Press the TV button on the remote control to put the remote in TV mode.
MUTE
GUIDE INFO
3. Press the INPUT button on the remote control to scroll through the Video Input
SUB
FORMAT
CH
Channels until you see Input 1 (Component) displayed in the channel banner.
MENU CLEAR
Note: You can set up the TV to automatically tune to the correct device you want
to view. This is called Auto Tuning. See Chapter 3 for more information on Auto
Tuning.
INPUT ANT•CABLE
REVERSE PLAY FORWARD
RECORD STOP PAUSE
Input channel appears here
Program Title/Acquiring Channel
Connections & Setup
P jacks on the back of the TV and to the Y P
B R
Input 1 (Component)
P outputs on the DVD player.
B R
• If you are done
connecting devices to
your TV, go to page 19
to complete the Assisted
Setup.
• To continue connecting
devices, go to the next
page.
12:39 PM
13