Appendix A T Ime Overcurrent Characteristic Curves - Siemens SCOR Installation, Operation & Maintenance Instructions Manual

Appendix A T ime Overcurrent Characteristic Curves

Figure A.1 through Figure A.16 illustrate the characteristic
curves that are programmed into the nonvolatile memory of this
relay.
Refer to Table 1 on Page 5 for a listing of the 1 6 characteristic
curves.
Note that a drawing number is given under each caption. Use this
number to order a full-size (1
The Phase and Ground Instantaneous Time Curves are pre­
sented in Figures A.1 7 and A.1 8 respectively.
x 1 2") Characteristic Curve set.
0"
Page 21