• Tighten the screws in ascending order by following the number marked beside each screw. Otherwise, the
system board might get damaged.
1070 Speaker assembly
For access, remove this FRU:
• "1010 Base cover assembly" on page 67
Removal steps of the speaker assembly
Step
Screw (quantity)
2
M2 × L5 mm, flat-head shoulder, nylon-coated (6)
a
a
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
73