Installation and Wiring
3.3 Precautions when Wiring COM Port
3.3.1 RS232C Communication
• Perform wiring and placement of the cable so that there is no impression of external noise
on the cable and no induction.
• Use shielded wires for distribution cables. (Recommended cable: AIGT8162)
• It conforms to CE marking. As conditions, the following wiring is required.
(1) Perform grounding of the cable shield.
(2) Perform grounding of the GT.
The figure shows the example of 24V DC type.
KEY POINTS
This product conforms to EN61131-2 for the European EMC Directive
•
2014/30/EU.
3-10