Table of Contents
Advertisement
Required items for connection
• LAN cable
Either straight cable or crossing cable can be used.
(MDI/MDI-X Auto-crossover function)
Ethernet communication setting
Follow the procedure below to communicate with the Ethernet connection.
1. Connect the GT to a PC with an Ethernet cable.
2. Specify the settings such as IP address for the GT.
3. Start the GTWIN and specify the communication parameters.
The factory settings are as follows.
IP Address (IP address)
Subnetmask
Default Gateway
Port no.
Note) Setting items such as the IP address of the GT can be specified in the System Menu or GT Configuration.
Setting with GTWIN
2.2 Connection with Screen Creation Tool GTWIN
192.168.1.10
255.255.255.0
192.168.1.1
9094
Network type: Ethernet
Title: Input an arbitrary title.
(Within 38 characters)
Computer:
Check "Acquire IP address automatically".
The default setting is to use the IP address
currently being used in the computer.
Click [OK] to finish the setting.
Note) When using multiple Ethernet cards,
specify manually.
2-9
Advertisement
Table of Contents
