Advertisement
How to carry
1
Hook the display into the platform.
5
Place the cables above the grip holders.
Convenient Uses
The display can be removed for doctors to view while the patient holds the grips.
1
Remove the display by unscrewing the two screws located
underneath the grip holder.
How to Carry and Convenient Uses
2
Hang the cables from the hooks located on both sides of
the grip holders.
6
Handle hole
1) Place the rings on the bottom of the cover onto the legs of the measurement stand.
2) Pass the handle of the platform through the handle hole of the cover.
2
Grip holder cover
The grip holder cover is used when the display has been removed
from the grip holder.
3
Use the fastening bands to secure both grips to the device.
1)
Caution
・When removing the display, be sure to fasten the grips to the grip holders with
・Coil up the cable that connects the display with the device before storage.
・Hang the grip cables from the hooks on both sides of the grip holder.
4
Coil the display cable and fasten it with
the clip provided.
7
2)
Handle
Hold the device by the handle when carrying.
the fastening bands before turning over to remove the screws.
Advertisement
