LG 32LY340C Owner's Manual page 4

4
SAfEty INStRUctIONS
Signal from Remote Control can be
y
interrupted due to external/internal
lighting eg Sunlight, fluorescent
lighting. If this occurs turn off lighting
or darken viewing area.
When connecting external devices
y
such as video game consoles, make
sure the connecting cables are long
enough. Otherwise, the product may
fall over, which may cause injury or
damage the product.
Do not turn the product On/Off by
y
plugging-in or unplugging the power
plug to the wall outlet. (Do not use
the power plug for switch.) It may
cause mechanical failure or could
give an electric shock.
Please follow the installation
y
instructions below to prevent the
product from overheating.
- The distance between the product
and the wall should be more than 10
cm.
- Do not install the product in a
place with no ventilation (e.g., on a
bookshelf or in a cupboard).
- Do not install the product on a
carpet or cushion.
- Make sure the air vent is not
blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation
y
openings when watching the TV
for long periods as the ventilation
openings may become hot. This
does not affect the operation or
performance of the product.
Periodically examine the cord of your appliance,
y
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
Prevent dust collecting on the power
y
plug pins or outlet. This may cause a
fire hazard.
Protect the power cord from physical
y
or mechanical abuse, such as being
twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular
attention to plugs, wall outlets, and
the point where the cord exits the
appliance.
Do not press strongly upon the panel
y
with a hand or sharp object such as
nail, pencil or pen, or make a scratch
on it, as it may cause damage to
screen.
Avoid touching the screen or
y
holding your finger(s) against it
for long periods of time. Doing so
may produce some temporary or
permanent distortion/damage to
screen.
When cleaning the product and its
y
components, unplug the power
first and wipe it with a soft cloth.
Applying excessive force may cause
scratches or discolouration. Do not
spray with water or wipe with a wet
cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax,
benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire,
electric shock or product damage
(deformation, corrosion or breakage).
As long as this unit is connected to the AC wall
y
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the
y
plug and unplug it, by pulling at the
plug. Don't pull at the cord to unplug
the power cord from the power
board, as this could be hazardous.
When moving the product, make
y
sure you turn the power off first.
Then, unplug the power cables,
antenna cables and all connecting
cables. The TV set or power cord
may be damaged, which may create
a fire hazard or cause electric shock.
When moving or unpacking the
y
product, work in pairs because the
product is heavy. Otherwise, this
may result in injury.
Contact the service centre once a
y
year to clean the internal parts of
the product. Accumulated dust can
cause mechanical failure.