Page 1
OWNER’S MANUAL LED TV * *LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. 32LY340C 42LY340C 47LY340C 55LY340C...
SAfEty INStRUctIONS SafEty INStructIoNS Please read these safety precautions carefully before using the product. WARNING Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause Do not place the TV and/or water damaged inside the Product remote control in the following and could give an electric shock.
Page 3
SAfEty INStRUctIONS cAUtION Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable Install the product where no radio objects such as paper and matches. wave occurs. Children must pay particular attention. Electrical shock, fire or injury can occur.
Page 4
SAfEty INStRUctIONS Signal from Remote Control can be Do not press strongly upon the panel interrupted due to external/internal with a hand or sharp object such as lighting eg Sunlight, fluorescent nail, pencil or pen, or make a scratch lighting. If this occurs turn off lighting on it, as it may cause damage to or darken viewing area.
Page 5
SAfEty INStRUctIONS Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Displaying a still image (e.g., broadcasting channel apparatus, the apparatus has been logo, on-screen menu, scene from a video game)
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
tABLE Of cONtENtS taBLE of coNtENtS SafEty INStructIoNS MaINtENaNcE Cleaning your TV - Screen, Frame, Cabinet, and Stand LIcENSES - Power Cord oPEN SourcE SoftWarE trouBLESHootING NotIcE SPEcIfIcatIoNS taBLE of coNtENtS Ir coDES aSSEMBLING aND PrEParING Unpacking EXtErNaL coNtroL DEVIcE Parts and Buttons SEtuP - Using the Joystick Button...
Remote Control, Owner’s Manual Power Cord Stand Base Batteries (AAA) (Depending on model) (For 42/47/55LY340C) (For 32LY340C) Stand Screws Stand Screws Cable Holder Stand Holder 4 EA, M4 x L14 4 EA, M4 x L20 2 EA...
Page 9
ASSEMBLING AND PREPARING cAUtION Do not use any unapproved items to ensure the safety and product’s lifespan. Any damages or injuries by using unapproved items are not covered by the warranty. Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.
ASSEMBLING AND PREPARING Parts and Buttons Screen Speakers Joystick Button Remote control Sensor Power Indicator 1. Joystick button is located below the screen of TV. NOtE You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING Using the Joystick Button You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right Basic functions When the TV is turned off, place your finger on the joystick button and Power On press it once and release it.
Make sure not to hold the transparent part, speaker, or speaker grill 4 EA area. M4 x L14 (for 32Ly340c) 4 EA M4 x L20 Use at least two people to move a large TV. When transporting the TV by hand, hold the TV as shown in the following illustration.
ASSEMBLING AND PREPARING Mounting on a table Securing the tV to a wall (optional) Lift and tilt the TV into its upright position on (Depending on model) a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 c m 1 0 c m 1 0 c m...
We recommend the use of LG’s wall mount your warranty. bracket. Use the screws and wall mounts that When you do not use LG’s wall mount bracket, meet the VESA standard. Any damages please use wall mount bracket which the or injuries by misuse or using an...
MAKING cONNEctIONS MaKING coNNEctIoNS Image shown may differ from your TV. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.
MAKING cONNEctIONS Other connections Connect your TV to external devices. For the best picture and audio quality, connect digital devices using an HDMI cable. Cables not provided. Digital Audio System Speaker (8Ω) OPTICAL AUDIO IN OPTICAL EXTERNAL DIGITAL SPEAKER OUT AUDIO OUT RGB IN (PC) RS 232C IN (CONTROL &...
Page 17
MAKING cONNEctIONS Blu-Ray / HD cable Box / HD StB / DVD / Pc HDMI DVI OUT AUDIO OUT OPTICAL EXTERNAL DIGITAL SPEAKER OUT AUDIO OUT RGB IN (PC) RS 232C IN (CONTROL & SERVICE) MHL cable ANTENNA CABLE Mobile phone VIDEO/ AUDIO...
REMOtE cONtROL rEMotE coNtroL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover.
MAINtENANcE MaINtENaNcE cleaning your tV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. cAUtION Before cleaning, turn the power off and disconnect the power cord and all other cables. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics.
Condition Storage Humidity Less than 85 % Power Requirement AC 100-240 V ~ 50 / 60 Hz For the power supply and power consumption, refer to the label attached to the product. 32LY340C 42LY340C MODELS (32LY340C-CA) (42LY340C-CA) With stand 732 x 481 x 207 (mm)
Page 22
SPEcIfIcAtIONS RGB (Pc), HDMI (Pc) supported mode component port connecting information (HDMI IN 2 does not support PC mode.) Component ports on the TV Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 640 x 350 31.47 70.09 Video output ports on DVD player 640 x 480 31.469 59.94...
IR cODES Ir coDES (Depending on model) Code Code Function Note Function Note (Hexa) (Hexa) ◄◄ Remote control Button Remote control Button (POWER) (Power On/Off) AV 模式 AV MODE 畫面比例 RATIO Remote control Button Remote control Button 輸入 INPUT Remote control Button Remote control Button 節目導覽...
EXtERNAL cONtROL DEVIcE SEtUP EXtErNaL coNtroL type of connector; D-Sub 9-Pin Male DEVIcE SEtuP RS-232c Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
EXtERNAL cONtROL DEVIcE SEtUP RS-232c configurations Set ID Set ID number; “Real Data Mapping” 7-Wire Configuration (Serial female-female NULL modem cable) Press HOME to access the main menus. Press the Navigation buttons to scroll to Option and press OK. Press the Navigation buttons to scroll to Set ID and press OK.
EXtERNAL cONtROL DEVIcE SEtUP communication Parameters Baud rate: 9600 bps (UART) Stop bit: 1 bit Data length: 8 bits Communication code: ASCII code Parity : None Use a crossed (reverse) cable. command Reference List (Depending upon model) DATA DATA COMMAND1 COMMAND2 COMMAND1 COMMAND2 (Hexadecimal) (Hexadecimal)
EXtERNAL cONtROL DEVIcE SEtUP transmission / Receiving Protocol transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
Page 28
EXtERNAL cONtROL DEVIcE SEtUP 01. Power (Command: k a) 03. Screen Mute (Command: k d) ► To control Power On/Off of the set ► To select screen mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Data 00: Screen mute off (Picture on), Video-out Mute off...
Page 29
EXtERNAL cONtROL DEVIcE SEtUP 07. Brightness (Command: k h) 12. Remote Control Lock Mode (Command: k m) ► To adjust screen brightness. ► To lock the front panel controls on the monitor and remote control. You can also adjust brightness in the PICTURE Transmission [k][m][ ][Set ID][ ][Data][Cr] menu.
Page 30
EXtERNAL cONtROL DEVIcE SEtUP 15. Energy Saving (Command: j q) 17. Equalize (Command: j v) ► To reduce the power consumption of the TV. ► To adjust eqalize. You can also adjust Energy Saving in PICTURE Transmission [ j ][v][ ][Set ID][ ][Data][Cr] menu.
Page 31
EXtERNAL cONtROL DEVIcE SEtUP 19. Program Add/Del (Command: m b) Input Number Data ► To set skip status for the current Program. Input 1 Transmission [m][b][ ][Set ID][ ][Data][Cr] Input 2 Data 00: Skip Data 01: Add Input 3 Ack [b][ ][Set ID][ ][OK/NG][Data][x] Input 4 Ack [b][ ][Set ID][ ][OK/NG][Data][x] 20.
Page 32
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
Need help?
Do you have a question about the 32LY340C and is the answer not in the manual?
Questions and answers