Remote Buttons - RCA MultiMedia Monitor User Manual

Using the Remote

Remote Buttons

ON•OFF When in TV mode, turns the monitor on and off. If in another
device mode (VCR, DVD, Satellite(DIRECTV), etc.) and programmed, will
turn the device on and off. Press twice within two seconds to turn off
most ProScan, RCA and GE products at once.
VCR1 Puts the remote in VCR mode and if auto tuning is enabled, it
will turn on the monitor and tune to the correct channel.
TV Turns on the monitor and puts the remote in TV mode. Also
displays channel information.
DVD Puts the remote in DVD mode and if auto tuning is enabled, it will
turn on the monitor and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled, it
will turn on the monitor and tune to the correct channel.
LED The LED light indicates programming mode when programming
the remote to control components.
AUX Puts the remote in AUX mode. Also, turns on the monitor.
DIRECTV Puts the remote in satellite mode and if auto tuning is
enabled, it will turn on the monitor and tune to the correct channel.
MUTE Reduces the monitor's volume to its minimum level. Press again
to restore the volume.
SKIP Press once before changing channels and the monitor will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL – or VOL + Decreases or increases the monitor's volume.
FETCH Brings up Picture Mode choice list (Computer/text or Video)
when tuned to VGA1 or VGA2. Some ProScan, RCA and GE devices use
FETCH as a shortcut to menu items.
GO BACK Returns you to the previous channel or previous screen in
the menu system.
GUIDE In satellite (DIRECTV) mode brings up available on-screen
guides.
INFO Brings up channel information; press again to clear the screen.
MOVE (Arrows) Used to point to different items in the menu system
and adjust the menu controls. Also moves the PIP window when no
menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
MENU Brings up the Main menu and selects highlighted items. When
in VCR mode, it functions as a PROGRAM button.
28
ON OFF
VCR1
DVD VCR2
LED
MUTE
FETCH
GUIDE
OK
MENU
1 2
4 5
7 8
INPUT
0
REVERSE PLAY
RECORD STOP
PIP SWAP CH CTRL
NOTE
The VCR1, DVD, VCR2, and DIRECTV
buttons also turn on most RCA, GE and
ProScan products.
TV
AUX DIRECTV
SKIP
GO BACK
INFO
CLEAR
3
6
9
ANTENNA
FORWARD
PAUSE
WHO