Set The Sat/Cable Channel (Auto Tuning) - RCA MultiMedia Monitor User Manual

Connections & Setup

Set the SAT/CABLE Channel (auto tuning)

The next step lets you set the SAT/CABLE channel. When you set the
SAT/CABLE channel, you're telling the monitor what channel to tune to
when you press the DIRECTV button on the remote.
Indicate which input you used to connect a satellite receiver, a cable box
or a digital set top converter. If you don't have one of these
components connected to the monitor, skip this step.
1. From the CHANNEL menu (shown below), select Auto Tuning.
2. From the AUTO TUNING menu (shown below), select Set SAT/CABLE
Channel.
3. From the SET SAT/CABLE Channel menu (shown below), point to
the choice in the that matches the way you have your satellite
receiver or cable box connected to the monitor.
4. Press OK to select it.
24