Set The Vcr2 Channel (Auto Tuning) - RCA MultiMedia Monitor User Manual

Connections & Setup

Set the VCR2 Channel (auto tuning)

You can set the VCR2 button on the remote to automatically tune to an
input channel as well. If you don't have a VCR2 component connected to
the monitor, skip this step.
1. From the CHANNEL menu (shown below), select Auto Tuning.
2. From the AUTO TUNING menu (shown below), select Set VCR2
Channel.
3. From the SET VCR2 CHANNEL menu (shown below), point to the
choice in the that matches the way you have your VCR connected to
the monitor.
4. Press OK to select it.
22