Table of Contents
Advertisement
Connections & Setup
4.
Use the left and right arrows to point to the hour and minutes
spaces. Use the up and down arrows to scroll through the numbers
and change from AM to PM. Press OK to exit.
Auto Channel Search
The next step of the setup routine "autoprograms" channels into the
channel list.
1.
Press MENU bring up the Main menu and then select Channel.
2.
From the CHANNEL menu (shown below), select Auto Channel
Search.
The monitor will begin searching for channels and give you a
progress report. When the channel search is complete, press OK on
the remote to go back to the Channel menu.
20
Advertisement
Table of Contents
