Audiovox Rampage AV-428 Owner's Manual And Installation Manual page 6

OPERA A A A A T T T T T ING INSTRUC OPER OPER ING INSTRUCT T T T T IONS ING INSTRUC ING INSTRUC
OPER OPER ING INSTRUC
29
3
4
5
6
7
1 1 1 1 1
ON-OFF POWER BUTTON
Press this button to turn the unit on and off when the
ignition switch is on. When the unit is off, the Liquid
Crystal Display (LCD) panel will normally display the
time-of-day. If the radio is off when the ignition switch is
turned off, the POWER button must be pressed to turn on
the radio after the ignition switch is turned on. If the
ignition switch is turned off while the radio is on, the radio
will display the time of day, and will come on automatically
when the ignition switch is again turned on.
2 2 2 2 2
VOLUME LEVEL CONTROL
To increase the volume level, rotate the PUSH SELECT-
VOL control clockwise (CW). The volume will increase
and the level will be shown on the display panel from a
minimum of 00 to a maximum of 100. To decrease the
volume level, rotate the PUSH SELECT control counter-
clockwise (CCW). The volume will decrease as shown
on the display panel. This control also includes the
Select button
balance and fader levels as described in
7
.
3 3 3 3 3
SELECT BUTTON (SEL)
This button is used to select the audio function (bass,
treble, balance, or fade) to be adjusted using the Volume
2
Level control
the unit for volume adjustment (VOL will appear on the
display panel). Pressing the button additional times will
6
select bass adjustment (BAS on display), treble (TRB),
balance (BAL), or fader (FAD). The display will
IONS IONS
IONS IONS
24
19
2
1 13
3
for adjustment of the bass, treble,
.
Pressing the Select button once will set
27, 28
BEHIND PANEL
20
Auto Reverse
AV-428
31 36 37 38
32
16
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
4 4 4 4 4
BASS CONTROL
To adjust the bass level, first select the Bass mode by
pressing the PUSH SELECT button
indication appears on the display panel. Within 5 seconds
of choosing the Bass mode, rotate the Volume Level
control
desired. The level will be shown on the display panel from
a minimum --10 to a maximum of 10 (00 indicates flat
response). The display will automatically return to the
normal indication 5 seconds after the last adjustment or
when another function is activated.
NOTE: If the BAS or TRE functions are set while the
5 5 5 5 5
4 5 6
, , , TREBLE CONTROL
and
To adjust the treble level, first select the Treble mode by
pressing the PUSH SELECT button
indication appears on the display panel. Within 5 seconds
of choosing the Treble mode, roatate the Volume Level
control
desired. The level will be shown on the display panel from
a minimum of --10 to a maximum of 10 (00 indicates flat
response). The display will automatically return to the
normal indication 5 seconds after the last adjustment or
when another function is activated.
22 23 21 30
18 17
33 8, 10
2
CCW or CW to adjust the bass response as
Equalizer function (EQ) is active, the Equalizer
function will automatically revert to the FLAT
setting.
2
CCW or CW to adjust the treble response as
15
14
25
11
12
34
35
26
9
3
so the BAS
3
so the TRB