Electrical Safety (Grounding Instructions) - Husky H1504ST2 Use And Care Manual

Safety Information (continued)
ELECTRICAL SAFETY (GROUNDING
INSTRUCTIONS)
1. In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This air compressor is
equipped with an electric cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into a matching outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
2. Do not modify the plug provided. If it will not fit the outlet,
have the proper outlet installed by a qualified electrician..
3. The conductor with insulation having an outer surface that
is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the
electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
4. Check with a qualified electrician or service personnel if
the grounding instructions are not completely understood,
or if in doubt as to whether the tool is properly grounded.
5. Replace a damaged or worn cord immediately.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock.
6. This air compressor is intended for use on a circuit that
has an outlet like the one shown in the figure. It also has a
grounding pin like the one shown. This product must be
grounded.
7. Never use an electrical adapter with this grounded plug.
GROUNDING PIN
120V GROUNDED OUTLET
7
Contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM