Display - RCA STAV-3860 Owner's Manual

DISPLAY

PRO LOGIC
1 2 PRO LOGIC indicator
Lights when any Dolby Pro Logic mode is
selected.
The main character display briefly shows the
current Pro Logic mode (
THEATER 1, THEATER 2
page 20).
2 DSP indicator
Lights when any DSP mode is selected. The main
character display briefly shows the current DSP
mode (
HALL, JAZZ, DANCE, THEATER1 and
) after selection (see page 22).
THEATER 2
3 DIRECT indicator
Lights when source DIRECT is on. This function
bypasses all tone, balance, DSP and Dolby
Surround effects.
4 MONITOR indicator
Lights when
MONITOR
recording as it's being made (see page 26).
5 TUNER indicators
MONO:
Lights when the mono mode is set using the
MPX MODE button (see page 23).
TUNED:
Lights when a broadcast is being received.
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
18
1 2
DSP
9
PRO LOGIC,
) after selection (see
is selected to hear a
3 4
DIRECT MONITOR
S. BASS
SP A
8 7
6 MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is
maintained even when the power is off. ---dB
indicates the minimum level, and 0dB indicates
the maximum level.
• Depending on the level settings for
individual channels, the MAX level can
range between –10dB and 0dB.
7 SPEAKER indicator
Shows if the speaker system is on or not. If SP
3A appears, speakers are switched on.
If SP 3 appears, speakers are switched off.
8 S. BASS indicator
Lights when the S. BASS is on (see note %
on page 17).
9 CHARACTER display
Shows the radio frequency or function (DVD/LD,
CD, etc.) receiver is using .
5
MONO
TUNED
STEREO
dB
6