Preparing The Remote Control - RCA STAV-3860 Owner's Manual

Professional series
Table of Contents

Advertisement

PREPARING THE REMOTE CONTROL

Loading the batteries
Operating Range of Remote Control Unit
The remote control may not work properly if:
• There are obstacles between the remote
memo
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
The FUNCTION & SOURCE SELECT Buttons on the Remote Control
Please note that the remote control has two types of buttons, one called
called
SOURCE SELECT
(CD, CDR/TAPE, TUNER, etc.) and use the
remote control itself will operate. Thus, if the STAV-3860 is in TUNER mode, for example, and you want
to listen to your CD player, you need to select the CD mode with the
Operating other RCA Components
By connecting a control cord (optional), you can
control other RCA professional series equipment
using this remote control unit. Point the remote
control unit towards the remote sensor of this
unit, even when operating other equipment.
The remote control signals are received by the
remote sensor of this unit, and sent to the other
devices via the
CONTROL OUT
You can also control RCA professional
memo
series components by pointing the
receiver's remote control directly at the
component. This type of operation
does not require control cords.
Dry Cell Batteries (not included)
(AA size IEC R6P x 2)
. Use the
button to choose the component you want to listen to
FUNCTION
SOURCE SELECT
terminal.
CAUTION:
Incorrect use of batteries may result in
such hazards as leakage and bursting.
Observe the following precautions:
• Never use new and old batteries to
gether.
• Insert the plus and minus sides of
the batteries properly according to
the marks in the battery case.
• Batteries with the same shape may
have different voltages. Do not use
different batteries together.
buttons to change which component the
FUNCTION
CONTROL
OUT
STAV-3860
REMOTE CONTROL UNIT
30
30
23 ft.
and a set of buttons
FUNCTION
button.
CONTROL
IN
OUT
OTHER RCA PROFESSIONAL
SERIES PRODUCTS WITH OSR
MARK
CONNECT TO CONTROL IN
TERMINAL OF OTHER RCA
PROFESSIONAL SERIES
PRODUCTS WITH OSR MARK.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents