Team Orion ADVANTAGE TOUCH DUO V-MAX Quick Start Manual page 5

ENGLISH
INSTRUCTION MANUAL
1. Battery and Charger connection
See the separate quick instructions sheet for info on how to connect the
charger and battery.
2. Charger Assistant
The first time you start the charger, a setup assistant will help you setup your
charger. You can restart the assistant from the advanced setup screen.
www.teamorion.com Copyright 2013 © Team Orion
3. Main Screen
The buttons at the top of the screen indicate the current settings. Press each
button to setup the particular parameter. You need to adjust the parameters
according to your battery.
S1 S2 S3 S4 S5 +
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
CHARGE DISCHARGE CYCLE
VIEW
BALANCE STORAGE
DATA
S1 Battery type NiMH, NiCd, LiPo, LiFe, LiIon or Pb
S2 Number of cells composing the battery, from 1 to 16
(1 to 6 for LiPo, LiFe, LiIon)
S3 Battery nominal capacity (setup by the user)
S4 Charge current (setup by user, actual value will be indicated during function)
S5 Discharge current (setup by user, actual value will be indicated
during function)
+ Use this key to enter the advanced setup screen.
The main buttons are used to select the various functions of the charger.
4. Active and inactive Buttons
Buttons which are grayed out indicate that the particular function cannot be
used with the charger's current setup.
5. Adjusting the charger's parameters
You need to setup the proper parameters so that the charger can safely charge
your battery. Setup the charge parameters following the battery manufacturer
recommendations.
1) Battery type
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
BATTERY TYPE
LIPO NIMH LIION
LIFE NICD PB
2) Number of cells
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
NUMBER OF CELLS
2CELLS
ENTER
7.4V
-
+
3) Capacity
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
CAPACITY
5000MAH ENTER
-
+
4) Charge current
The maximum
TYPE CELLS CAPACITY CHG DCHG +
possible charge
LIPO 2 5000 5.0A 1.0A
current is calculated
using various factors
CHARGE CURRENT
such as battery type,
power supply and
5.0A ENTER
parameters in
advanced settings.
- The default maxi-
+
mum charge power
is 150W.
5) Discharge current
The maximum
TYPE CELLS CAPACITY CHG DCHG +
possible discharge
LIPO 2 5000 5.0A 1.0A
current is calculated
DISCHARGE CURRENT using various factors
such as battery type,
power supply and
1.0A ENTER
parameters in
advanced settings.
-
+ The default maxi-
mum discharge
power is 100W.
Team Orion guarantees this product to be free from manufacturing and workmanship defects. The warranty does not cover
incorrect installation, components worn by use, or any other problem resulting from incorrect use or handling of the
product. No liability will be accepted for any damage resulting from the use of this product. By the act of connecting and
operating this product, the user accepts all resulting liability. Is considered incorrect use:
• Failure to follow instructions.
• Improper use of the product (abusive use, out of spec, etc.).
• Failure to adapt settings for proper function (improper connections, wrong gearing, installation, setup, etc.).
• Overload, overheating (desoldering, melting, etc.).
• Running in inadequate conditions (damage or rust from rain, humidity, etc.).
• Improper maintenance (presence of dirt, etc.).
• Disassembly, modification by the user (modifying original connectors, wires, components, etc.).
• Mechanical damage due to external causes.
6. Charging a battery
Once you have setup the proper parameters, you can charge your battery.
1) Connect the battery
Make sure that the battery is properly connected to the charger, charge leads
and balancing connector (if available) and that the parameters are compatible
with your battery.
2) Press and hold CHARGE
+
TYPE CELLS CAPACITY CHG DCHG
LIPO 2 5000 5.0A 1.0A
CHARGE DISCHARGE CYCLE
VIEW
BALANCE STORAGE
DATA
Press and hold the charge button, the battery check screen will be displayed.
3) Battery check
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
BATTERY CHECK...
< OK >
4) Charging screen
If no problems are detected, the charge screen will appear,
indicating the current status of the battery.
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
CHARGING
BALANCING
GRAPHIC STOP
STATUS
5) Charge Complete
Once the charge is completed, the final charge data will be displayed.
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
CHARGE COMPLETE: CC/CV
BALANCING
GRAPHIC OK
STATUS
• Never leave the charger unsupervised while it is powered on.
• Never let children operate the charger without supervision from an adult.
• Always setup the charger parameters according to the battery manufacturer specifications.
• Do not attempt to charge batteries which are not compatible with the charger.
• Do not exert excessive pressure on the touch screen.
• Do not use cleaning products to clean the touch screen, use only a clean cloth.
• Do not block the charger's cooling vents. • Do not expose to heat and direct sunlight. • Do not expose to water or humidity.
• The charger and batteries can become hot during use. Take great care before handling them.
• Use the charger in a well ventilated area, away from people and electrically conductive or flammable materials.
• If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking,
immediately disconnect the battery and store it in a safe location, away from people and flammable materials.
7. Discharging a battery
The charger features a discharge function.
1) Connect the battery
Make sure that the battery is properly connected to the charger, charge leads
and balancing connector (if available) and that the parameters are compatible
with your battery.
2) Press and hold DISCHARGE
+
TYPE CELLS CAPACITY CHG DCHG
LIPO 2 5000 5.0A 1.0A
CHARGE DISCHARGE CYCLE
VIEW
BALANCE STORAGE
DATA
Press and hold the discharge button, the battery check screen will be displayed.
3) Battery check
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
BATTERY CHECK...
< OK >
4) Discharging screen
If no problems are detected, the discharge screen will appear,
indicating the current status of the battery.
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
DISCHARGING
BALANCING
GRAPHIC STOP
STATUS
5) Discharge Complete
Once the discharge is completed, the final discharge data will be displayed.
TYPE CELLS CAPACITY CHG DCHG +
LIPO 2 5000 5.0A 1.0A
DISCHARGE COMPLETE: CUT-OFF
BALANCING
GRAPHIC OK
STATUS
Compatibility:
Input Power: • Advantage Touch charger with power cord
11-18VDC / 100-240VAC NiMH/NiCd 1-15 cells • 2x 4-in-1 Balancing Board (XH, TP/FP, EH and HP/PQ)
LiPo/LiFe/LiIon 1-6 cells • 2x charging cables
Charge Current: Pb 2-20V • USB cable
2x 0.1A to 10A (100W)
• Instruction Manual
Dimensions: • Quick Start User Guide
Discharge Current: L202 x W190 x H74mm
2x 0.1A to 5A (20W)
Weight:
1340g