Table of Contents
Advertisement
SW1
Parameter
Position
4
Ch1A Delay
5
Ch1B Delay
6
Ch2A Delay
7
Ch2B Delay
Auto Track
8
No Signal
9
Delay
No Signal
A
Threshold
B~F
Reserved
Note the following when setting parameters
When power is supplied, the default setting of ADC6820N(S)4 is Bank 0.
It is not need to choose Bank to ADC6820N(S), rotate SW1 to set at one position, and then toggle
SW2 to adjust the corresponding parameter.
Keep SW2 up or down can adjust continually
Go back to the default
To ADC6820N(S)4, set it at Bank 0, rotate SW1 to F, and toggle SW2.
To ADC6820N(S), rotate SW1 to F, and toggle SW2.
When setting ADC6820N(S)4, please pay attention to the status of LED indicators.
Adjust delay
DC6820NXX AUDIO A/D CONVERTER
Function
source ＝ DARS, the
setting is invalid. ）
Ch1A Delay
Ch1B Delay
Ch2A Delay
Ch2B Delay
Audio tracking delay
(only valid for
ADC6820NS4)
No Signal Delay
No Signal Threshold
- 15 -
Options
0~1980 ms @ 32 kHz
0~1320ms @ 48 kHz
0~660 ms @ 96 kHz
0~1980 ms @ 32 kHz
0~1320ms @ 48 kHz
0~660 ms @ 96 kHz
0~1980 ms @ 32 kHz
0~1320ms @ 48 kHz
0~660 ms @ 96 kHz
0~1980 ms @ 32 kHz
0~1320ms @ 48 kHz
0~660 ms @ 96 kHz
Enable
Disable
0 ~255s
-72dB/-66dB/-60dB/-54dB/-48dB
USER MANUAL
Default
0.000ms
0.000ms
0.000ms
0.000ms
Disable
30s
-60dB
Advertisement
Table of Contents
