The Basic Connection - RCA Home Theatre P60928 User Manual

Setup and Connections

The Basic Connection

The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
Cables
You will use the following cable to make your
connection:
Coaxial Cables: These cables carry both the audio and video signal to
the TV from an antenna, cable, or cable box. In this connection, a second
Coaxial Cable carries the signal through the VCR to the TV.
FROM CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO AUDIO
TV
INPUT 2
VIDEO
INPUT 1 R—AUDIO—L
VIDEO
R R
AUDIO AUDIO
L
L
S-VIDEO
AUDIO OUTPUT
Once you have completed this connection go to "Step 3:
Connect the G-LINK Cable" on page 9.
IN FROM ANT
CH3
CH4
OUT TO
S-VIDEO
G-LINK
CABLE/
ANTENNA
INPUT
How to View the VCR
To watch the VCR in this connection tune TV to
Channel 3 or 4.
Later, in the Interactive Setup section you will
program the TV to automatically tune to Channel 3 or
4 when you turn on the VCR.
5