The Basic Connection (Pip Not Available) - RCA P52936 User Manual

Setup and Connections

The Basic Connection (Pip Not Available)

The basic connection below (TV and VCR) is used to illustrate a single
component connection with your TV. For better sound and picture
quality and multiple component connection information refer to,
Advanced Connections.
Cables
You will use the following cable to make your connection:
Coaxial Cables: These cables carry both the audio and video signal to
the TV from an antenna, cable, or cable box. In this connection, a second
Coaxial Cable carries the signal through the VCR to the TV.
FROM CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO
AUDIO
TV
Once you have completed this connection go to "Step 3:
Connect the G-LINK Cable" on page 9.
6
IN FROM ANT
CH3
CH4
OUT TO TV
R L G-LINK
P P Y
R B
Note:
This connection does not allow PIP
to work.
How to View the VCR
To watch the VCR in this connection tune TV to
Channel 3 or 4.
Later, in the Interactive Setup section you will
program the TV to automatically tune to Channel 3
or 4 when you turn on the VCR.