Remote Buttons - RCA Home Theatre P60928 User Manual

Using the Remote

Remote Buttons

ON•OFF When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device
on and off. When pressed twice within two seconds all devices that are
on will be turned off (this feature only works with most RCA, GE and
PROSCAN products).
VCR1 Puts the remote in VCR mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD Puts the remote in DVD mode and if autotuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light which indicates programming mode when programming
the remote.
AUX Puts the remote in AUX mode. Also turns on the TV, if auto tune is
enabled.
SAT•CABLE Puts the remote in SAT•CABLE mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct channel.
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL – or VOL + Decreases or increases the TV's volume.
SOUND Press once to display the audio processor choice list. Point and
select to choose a different processor or press CLEAR to exit.
GO BACK Returns you to the previous channel.
GUIDE Brings up GUIDE Plus+ Gold System and exits the Guide.
INFO Press to get more information about a program, channel, or
advertisement.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PIP window when
no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
MENU Brings up the Main menu and selects highlighted items. When in
VCR mode, it functions as a PROGRAM button.
22
LED
VCR1 ON OFF TV
DVD VCR2 AUX SAT•CABLE
MUTE SKIP
SOUND
GO BACK
INFO
GUIDE
OK
MENU
CLEAR
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+
STOP PAUSE
PIP SWAP CH CTRL RESET