Protection - Mantracourt DSCUSB Advanced User's Manual

Protection

You can protect the module against a standard user being able to enter any of the Advanced Calibration pages of
the DSC Toolkit.
If you do not want to protect the module (or want to remove protection from a previously protected module) enter
zero after clicking the Passcode field.
To protect a module enter up to 6 numeric digits after clicking the Passcode field. This 6 digit passcode will then be
required by a standard user to enable the Advanced Calibration section of the software.
If you forget the passcode you will need to contact your module supplier so please
remember the passcode and keep it safe.
13 Mantracourt Electronics Limited - DSCUSB Advanced Manual