Table of Contents
Advertisement
Main Menu
Connections
0
Go Back
Front Input
1
Signal Strength
2
Channel Search
Use this screen if you have misplaced your remote control
3
Software Upgrade
and need a way to tune to a different antenna or to go to
the video inputs. Use the arrows to highlight the rectangle
4
Signal Source
Signal Source
then press OK or MENU-OK to scroll to the input you want.
5
Video Input Source
6
Auto Tuning
7
Special Features
8
Ethernet Setup
You can select a source from the available signal sources.
Press OK to continue.
Main Menu
Connections
0
Select the Input 2 video source:
Go Back
Component Video (Y PB PR)
1
Signal Strength
Composite Video
2
Channel Search
3
Software Upgrade
4
Signal Source
The component video (Y PB PR) connectors on the TV can
5
Video Input Setup
Signal Type
be changed to accept composite video instead. When using
composite video, connect the yellow RCA cable to the
6
Auto Tuning
Y/VIDEO connector on the TV.
7
Special Features
8
Ethernet Setup
You can select the Air/Cable setting for Antenna A and
Antenna B. Press OK to continue.
Main Menu
Connections
Select which input or channel should be automatically tuned
0
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Software Upgrade
VCR2 (AUX default)
Front Input
4
Signal Source
DVD
5
Video Input Setup
Front Input
6
Auto Tuning
SAT-CABLE (Satellite or Cable Box)
7
Special Features
Front Input
8
Ethernet Setup
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
Main Menu
Connections
0
Go Back
Select what should occur when power is restored to the TV:
1
Initial Channel
Text here
Off: Initial Channel is disabled
2
Initial Volume
On: Go to last input or channel selected
Cable Input
3
On: Go to
Maximum Volume
Channel
4
CableCARD Tools
5
Note: An Initial Channel setting of "On" will be enabled only
Remote Setup
when the TV is plugged back in or electricity is otherwise
restored to the TV. Initial Channel is not enabled from the
turning on of the TV with the remote or front buttons.
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Chapter 4
Using the TV's Menu System
Signal Source
The Signal Source menu allows you to choose the source from which you
would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The
same can be accomplished using the component buttons if you've set up Auto
Tuning on the remote or by pressing the INPUT button. But, if you misplace the
remote, this feature gives you another way to tune to a signal source.
Video Input Setup
The Video Input Setup screen lets you choose which type of connection you're
using for the Input 2 jack on the back of the TV. If you decide to change the
connection, you need to go back into the Video Input Setup screen and select
the corresponding option.
Auto Tuning
This menu lets you specify the various components you have connected to your
AUDIO (Audio Receiver/Amp)
TV. It lets you program a component button on the remote control (AUX or
Front Input
RCA SAT2
DVD) so that pressing the button automatically turns on the TV and turns the
Front Input
TV to the correct Video Input Channel (go to Chapter 3 for detailed
information).
Special Features
Special Features
Initial Channel and Initial Volume are two special features that are mostly
intended for commercial/retail use.
999
Sub-channel
999
Notes: The AUX button by default is set up for a second RCA VCR. If you
need to reprogram the AUX button, or instead want to program the VCR
button, use the 2001 code. Then use the VCR2 option in the auto tuning
menu to set auto tuning.
The RCA SAT2 option doesn't have a function for your remote.
Initial Channel You can select the tuner and channel or input that your
TV tunes to each time the TV is turned on by plugging it back in.
Initial Volume This feature works only if the Initial Channel feature is
set to On. Select the volume level that you want when the TV is turned on.
Maximum Volume This feature is intended to stop the volume from
being turned up too loudly. Set the volume at the loudest level you would
want to hear.
51
Advertisement
Table of Contents
