Software Upgrade; Signal Source; Video Input Setup; Auto Tuning - RCA SCENIUM User Manual

Main Menu
Current TV Software Version and Date: A2.0B/B2.0A
0
Go Back
1
Signal Strength
If you have a connection to the TV's Ethernet jack, your TV
may periodically alert you to the availability of a TV
2 Channel Search
software upgrade which can be downloaded through the
Ethernet jack.
3

Software Upgrade

Software Upgrade
From time to time, your cable company may use the Cable
4

Signal Source

Input to automatically upgrade the digital-cable software
5 in the TV. If the TV is on, you'll be notified when it occurs.

Video Input Setup

6

Auto Tuning

Status: TV-software upgrade XXXXX is available by
selecting the "Upgrade Now" button below.
7
Special Features
8
Ethernet Setup
You can view your current TV-software version and check
if a new software version is available.
Main Menu
0
Go Back
Front Input
1
Signal Strength
2
Channel Search
Use this screen if you have misplaced your remote control
3
Software Upgrade and need a way to tune to a different antenna or to go to
the video inputs. Use the arrows to highlight the rectangle
4
Signal Source Signal Source
then press OK or MENU-OK to scroll to the input you want.
5
Video Input Source
6
Auto Tuning
7
Special Features
8
Ethernet Setup
You can select a source from the available signal sources.
Press OK to continue.
Main Menu
Select the Input 2 video source:
0
Go Back
Component Video (Y PB PR)
1
Signal Strength
Composite Video
2
Channel Search
Select the Input 4 video source:
3
Software Upgrade Component Video (Y PB PR)
Composite Video
4
Signal Source
The component video (Y PB PR) connectors on the TV can
5
Video Input Setup Signal Type
be changed to accept composite video instead. When using
composite video, connect the yellow RCA cable to the
6
Auto Tuning
Y/VIDEO connector on the TV.
7
Special Features
8
Ethernet Setup
You can select the Air/Cable setting for Antenna A and
Antenna B. Press OK to continue.
Main Menu
Select which input or channel should be automatically tuned
0
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Software Upgrade VCR2 (AUX default)
Front Input
4
Signal Source
DVD
5
Video Input Setup
Front Input
6
Auto Tuning
SAT-CABLE (Satellite or Cable Box)
7
Special Features
Front Input
8 Ethernet Setup
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
Chapter 4
Downloaded from www.Manualslib.com
Software Upgrade
Connections
The Software Upgrade screen contains current software information and
indicates if a new upgrade is available. The software information and upgrades
can be accomplished only if you have the TV connected via the Ethernet cable
to the Internet with ISP subscription. Select the Upgrade Now button, if
Upgrade Now
available, to upgrade your software.
Signal Source
Connections
The Signal Source menu allows you to choose the source from which you
would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The
same can be accomplished using the component buttons if you've set up Auto
Tuning on the remote or by pressing the INPUT button. But, if you misplace the
remote, this feature gives you another way to tune to a signal source.
Video Input Setup
Connections
The Video Input Setup screen lets you choose which type of connection you're
using for the Input 2 and/or Input 4 jack on the back of the TV. If you decide to
change the connection, you need to go back into the Video Input Setup screen.
Auto Tuning
Connections
This menu lets you specify the various components you have connected to your
AUDIO (Audio Receiver/Amp)
TV. It lets you program a component button on the remote control (VCR, AUX,
Front Input
RCA SAT2
DVD, SAT/CAB, or AUDIO) so that pressing the button automatically turns on
Front Input
the TV and turns the TV to the correct Video Input Channel (go to Chapter 3 for
detailed information).
manuals search engine
Using the TV's Menu System
Note: If using a dialup service via a router connected at a dialup speed
of 56K, the Software Upgrade could take several hours or more. If the TV
is unplugged during a Software Upgrade, it could cause the TV to not
operate properly.
Notes: The AUX button by default is set up for a second RCA VCR. If you
need to reprogram the AUX button, or instead want to program the VCR
button, use the 2001 code. Then use the VCR2 option in the auto tuning
menu to set auto tuning.
If you have two RCA satellite receivers, you can control each separately.
Program the second receiver with the AUX button using the 5001 code.
Then use the RCA SAT2 option in the auto tuning menu to set auto
tuning.
57