Auto Tuning Feature - RCA HD52W56 User Manual

Main Menu Parental Controls
0
Go Back
Front Buttons Blocked
1
Lock TV
Front Buttons Unblocked
2
Video Input List
When the buttons on the TV are blocked and the TV is
3
Cable Channel List
locked, only the remote or keyboard will control the TV.
4 This keeps children from playing with the buttons. It also
Antenna Ch. List
keeps children from watching TV when a guardian is not
5
USA V-Chip present (you must hide the remote for this to be effective.)
6
Canada V-Chip
Note: If power to the TV is lost for a prolonged time (e.g.,
due to a power outage) the buttons become unblocked.
7
V-Chip Unrated
8
Front Button Block
Press OK to block (disable) the buttons on the front of the TV.
Only the remote or keyboard will control the TV.
Main Menu Connections
0 Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Software Upgrade
VCR2 (AUX default)
Front Input
4
Signal Source
DVD
5
Video Input Setup
Front Input
6
Auto Tuning
SAT-CABLE (Satellite or Cable Box)
7
Special Features
Front Input
8
Ethernet Setup
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
With the Auto Tuning feature, you can set up
the TV to tune to the channel you want to
watch by pressing that component's button.
Auto Tuning for the TV button cannot be set.
1. Press MENU (the MAIN MENU appears).
2. Highlight Connections and press OK.
3. Highlight Auto Tuning and press OK
4. Highlight the component button field and continually press OK to scroll through the selection
of inputs.
The choices and a brief explanation follow:
Not Connected Choose this if you don't have this particular component connected to the TV, or
if you don't want the TV to automatically tune to the correct channel when you press one of the
component buttons on the remote.
Channel 2, 3 or 4 Cable Input
of the TV, and you want the TV to tune to channel 2, 3, or 4 when you press the corresponding
button on the remote. Reminder: make sure the component's Channel 2/3 or 3/4 switch is set to
match the channel you choose in Auto Tuning.
Channel 2, 3 or 4 Antenna Input
back of the TV, and you want the TV to tune to channel 2, 3, or 4 when you press the
corresponding button on the remote. Reminder: make sure the component's Channel 2/3 or 3/4
switch is set to match the channel you choose in Auto Tuning.
Chapter 3
Front Button Block
Selecting this option lets you block (disable) or unblock (enable) the TV's
front buttons. The remote still tunes to any channel. Front Panel Block can:
•
•
(When using this as a Parental Control method, you should remove
access to any remote that is capable of operating the television.)
Don't forget to lock the TV after you select Blocked. If you do not, the
front panel block will not take effect.

Auto Tuning Feature

The way you set up the Auto Tuning feature in the TV's menu
AUDIO (Audio Receiver/Amp)
corresponds to the component buttons on the remote and the way you
Front Input
RCA SAT2
have each component connected to your TV. When you set auto tuning,
Front Input
you're telling the TV what channel or input to tune to when you press
the DVD or AUX button on the remote control. This is especially useful
for going directly to an input like HDMI/DVI.
Notes: The AUX button by default is set up for an RCA VCR. If you need to
reprogram the AUX button, use the 2001 code. Then use the VCR2 option
in the auto tuning menu to set auto tuning.
The RCA SAT2 option doesn't have a function for your remote.
Component is connected to the CABLE INPUT jack on the back
Component is connected to the ANTENNA INPUT jack on the
Using the TV's Features
Keep children from watching TV when the parent is not present.
Keep young children from playing with the buttons on the TV.
Note: If power to the TV is lost for an extended period, the buttons
become unblocked. Blocking the front buttons does not disable the
front input jacks.
37