Channel Search; Software Upgrade; Signal Source; Signal Type - RCA SCENIUM HDLP50W151 User Manual

Main Menu Connections
0 Use Full Search the first time that your TV is setup to
Go Back
search for channels on Antenna A and B. Full Search will also
1
Antenna Info automatically detect the proper Air or Cable setting.
A Full Channel Search requires several minutes to complete.
2

Channel Search

Thereafter, use Quick Search. It only searches the currently-
tuned antenna, keeps the Air or Cable setting the same, and
3

Software Upgrade

is faster. Quick Search is useful when adjusting an
over-the-air antenna to receive the channels for your area.
4

Signal Source

Tip: If you have Cable and Air, connect Cable to Antenna A.
5

Signal Type

If you have only Air, connect it to Antenna A.
6
Auto Tuning
Status: Antenna A (Cable), Antenna B (Air).
7
1394 Setup
Full Search
8
Special Features
Press OK to startt a Full Channel Search of both antennas
9
Ethernet Setup
including automatic detection of Cable or Air antenna.
Main Menu Connections
Current Software Version and Date: \A05.82d 5/12/2003
0
Go Back
1
Antenna Info
If you have a connection to the TV's Ethernet jack, your TV
2
Channel Search
may periodically alert you to the availability of a TV
software upgrade which can be downloaded through the
3
Software Upgrade Software Upgrade
Ethernet jack.
4
Signal Source
Status: Software upgrade is not available at this time.
5
Signal Type
If one were available, you would be able to select a button
on this screen to acquire it.
6
Auto Tuning
7
1394 Setup
8
Special Features
You can view your current TV-software version and check
9
Ethernet Setup
if a new software version is available. Press to continue.
Main Menu Connections
0
Go Back
Front Input
1
Antenna Info
Use this screen if you have misplaced your remote control
2
Channel Search
and need a way to tune to a different antenna or to go to
the video inputs. Use the arrows to highlight the rectangle
3
Software Upgrade
then press OK or MENU-OK to scroll to the input you want.
4
Signal Source Signal Source
5
Signal Type
6
Auto Tuning
7
1394 Setup
8
Special Features
You can select a source from the available signal sources.
9
Ethernet Setup
Press OK to continue.
Main Menu Connections
0 Antenna A Signal Type
Go Back
Air (UHF/VHF Antenna)
1
Antenna Info
Cable
2
Channel Search
Antenna B Signal Type
3
Software Upgrade Air (UHF/VHF Antenna)
4 Cable
Signal Source
You should not normally need to change the settings above
5
Signal Type Signal Type
because they are set automatically by a Full Channel Search.
If a setting in this screen is changed, you may have to run a
6
Auto Tuning
new Quick Channel Search to find that signal type's channels.
7
1394 Setup
Tip: If you have Cable and Air, connect Cable to Antenna A.
If you have only Air, connect it to AntennaA.
8
Special Features
You can select the Air/Cable setting for Antenna A and
9
Ethernet Setup
Antenna B. Press OK to continue.
Chapter 4
Using the TV's Menu System
Channel Search
Engaging in a channel search tells the TV to search for all the terrestrial TV
channels available through the antenna inputs. When the TV finds an active
channel, it places it in the channel list. Inactive channels (weak stations or
channels with no signal at all) aren't placed in the channel list.
Quick Search
The Channel Search screen lets you choose a Full Search or a Quick Search.
Full Search Searches both Antenna A and B, and automatically detects
whether they are cable or off-air.
Note: A Full Search can take several minutes.
Quick Search Searches only for channels on the antenna you're currently
using and uses the current Air or Cable setting. For optimum reception, you
need to conduct a Quick Search after you've adjusted a terrestrial antenna
because the TV might pick up new channels.
Notes: Channel Search takes a long time to complete because all possible
analog and digital channels are being searched.
If a cable box is connected to Antenna A and GUIDE Plus+ Setup was
performed, a channel search will not be permitted.
Software Upgrade
The Software Upgrade screen contains current software information and
indicates if a new upgrade is available. The software information and upgrades
can be accomplished only if you have the TV connected via the Ethernet cable
to the Internet with ISP subscription.
Note: If using a dialup service via a router connected at a dialup speed of
56K, the Software Upgrade could take several hours or more. If TV is
unplugged while doing a Software Upgrade during this time, it could
render the TV inoperable.You may want to decline a software upgrade if
you have this setup.
Signal Source
The Signal Source menu allows you to choose the source from which you
would like the signal to come: Antenna A, Antenna B, or Video Inputs. The
same can be accomplished using the component buttons if you've set up Auto
Tuning on the remote or the INPUT button. But, if you misplace the remote,
this feature gives you another way to tune to a signal source.
Signal Type
The Signal Type screen lets you choose whether you are receiving a signal from
cable TV or an off-air antenna for Ant A or Ant B. When you run a Full Search
in Channel Search, the TV automatically detects your signal and you don't have
to specify it here. However, if you decide to change the source, you can use the
Signal Type screen. Changing the source on Antenna A may mean that you will
have to make changes to your GUIDE Plus+ Setup settings.
71