Page 1
& EEKER SERIES ™ EEKER SERIES ™ VIDEO INSPECTION SYSTEMS DCS200 (shown) DCS300 (shown) DCS200/DCS200-09/DCS200-05 DCS300/DCS300-09/DCS355 USER’S MANUAL Please read this manual carefully and thoroughly before using this product.
They are widely used in applications such as HVAC/R building, aviation and vehicles maintenance. FEATURES • DCS200 Series: 2.4" (60.9mm) Color LCD Screen for a crystal clear image • DCS300 Series: 3.5" (88.9mm) Color LCD Screen for superb clarity and viewing effect •...
PRODUCT OVERVIEW A. LCD Screen 5mm Probe accessories B. Image Rotation L. Mirror C. Image Zoom M. Thread Protector D. Battery Compartment N. Ball Guide E. ON/OFF Switch / 9.0mm Probe accessories LED Lighting Intensity O. Mirror F. Probe Connector P.
BATTERY INSTALLATION 1. Use the included Phillips screwdriver to open the screw on the battery compartment cover (See Fig. 3). 2. Insert one “9V” alkaline battery into the battery compartment (See Fig. 4). Close the battery cover and fasten the screw. Battery Compartment Battery...
DISCONNECTING AND RECONNECTING THE PROBE: All of the probes from these 3 systems are interchange- Keyed Ends able and in the case of the 12mm dia. probe, you can add extensions to extend the camera tip up to 16 ft. (5m). To disconnect the probe Fig.
OPERATING INSTRUCTIONS LCD Screen Rotation Button Zoom Button ON/OFF BRIGHTNESS Fig. 8 BASIC OPERATION: To turn the unit on, hold the LCD display unit facing you (See Fig. 8). Roll the on/off/brightness switch away from you to turn the power on. The switch then acts as a dimmer for the LED’s in the tips of the probes.
CAMERA TIPPED PROBES Camera Camera Camera 5.5mm probe tip 9mm probe tip 12mm probe tip OPERATING PRECAUTIONS! • Maximum bending radius is 2"; exceeding this may damage the probe. • Do not use the probe (camera head) to clear pathways or clogged areas.
MAINTENANCE INSTRUCTIONS • Service must be performed by qualified repair personnel. • When servicing this product, only use identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions will void the warranty. • Disassembling this unit will void the warranty. •...
(3) years. Subject to certain restrictions, General will repair or replace this instrument, if after exam- ination, it is determined by General to be defective in material or workmanship.