Sony SAL50F14 Service Manual page 16

HELP11
Adhesive bond (B-40): J-6082-614-A
1. Match the position of the groove for aperture operating pin and the area for attaching coupler as shown in the figure.
2. Attach the linear guide keys, and apply the adhesive bond (B-40) to the four screws and tighten them as shown in the figure.
Groove for aperture
operating pin
Area for attaching coupler
HELP12
Grease (G-35):
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
1. Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the inside barrel.
Note:
Be careful not to get anti-diffusion agent (A-20) smeared to the portion A.
Apply the grease (G-35) (Slide portion)
Apply the grease (G-35)
(All circumference of threaded portion)
SAL50F14 (1.4/50) (50mm F1.4)
J-6082-621-A
J-6082-614-A
Apply the anti-diffusion
Apply the anti-diffusion
agent (A-20)
(Inside of the groove for
aperture operating pin)
Apply the adhesive bond (B-40)
Apply the adhesive bond
(B-40)
agent (A-20)
Portion A
Linear Guide Keys
Apply the
anti-diffusion
agent (A-20)
HELP