HELP14
1.
Close the aperture of the lens.
2.
Connect the BL connection flexible unit to the connector as shown in the figure.
3.
Align the preset ring lever to the aperture operating pin, coupler hole to the coupler, and attach the lens mount riveting block.
BL Connection Flexible Unit
Connector
Coupler
4.
Tighten the four screws in the order as shown in the figure.
2
3
1
SAL50F14 (1.4/50) (50mm F1.4)
Coupler Hole
Preset Ring Lever
Aperture Operating Pin
4
HELP