Download  Print this page

Focus Brush Position Check/Adjustment And Pattern Check - Sony SAL50F14 Service Manual

Lens for dslr camera (1.4/50) (50mm f1.4)
Hide thumbs

Advertisement

4-6.

FOCUS BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK

Note:
If dialog box of error code appears during the checking or adjustment, check the reason of error referring to page 4-20.
4-6-1. Focus Brush Position Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note: Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1)
Connect the checking lens to the camera.
2)
Start the lens adjustment program "LensAdjustment.exe" referring to "4-1-2. Lens Adjustment Program".
2. Checking Method
[Connect]
1)
Click the
Note:
Click the
[Focus]
2)
Click the
3)
Set the focus position to infinity end, then check that the OK (Green) indicator of "Position" lights as shown in Fig. 4-6-3.
If the NG (Red) indicator of "Position" lights, perform the "4-6-2. Focus Brush Position Adjustment and Pattern Check".
[Exit]
4)
Click the
[End]
5)
Click the
6)
Turn the POWER switch of the camera to OFF.
SAL50F14 (1.4/50) (50mm F1.4)
Fig. 4-6-1
button on the lens adjustment program.
[End]
button to disconnect the USB connection, then lens adjustment program will terminate.
Fig. 4-6-2
button on the lens adjustment program.
Fig. 4-6-3
Fig. 4-6-4
button.
button to terminate the lens adjustment program.
4-17

Advertisement

loading

  Related Manuals for Sony SAL50F14