Intended Use - Bosch GCC 30 TrackTag Professional Original Instructions Manual

Table of Contents

Available languages

18 | English

 The following locations are suitable for attaching a GCC 30 TrackTag Professional

(for examples, see image E):

– Surfaces where attaching the GCC 30 TrackTag Professional does not prevent

or complicate the operation of the object,

– Surfaces that are not be exposed by the identified object falling over,

– Surfaces with the minimum possible curvature.

 Only use the two-part adhesive provided and observe all processing instruc-

tions from the manufacturer when attaching to the object. The use of adhe-

sives with a different composition may either cause damage to the object to be

identified or fail to create a permanent bond between the

GCC 30 TrackTag Professional and the object.

 Prepare the bonding surface in accordance with the instructions from the

manufacturer of the two-part adhesive. If the object to be identified is not prop-

erly cleaned before bonding, the material properties could change, potentially

leading to damage.

 Protect any object identified with a GCC 30 TrackTag Professional against

heat. Long-term exposure to sunlight and high temperatures (>70 °C) may cause

damage to the battery.

 Only use batteries listed in this operating manual. Do not use any other button

cells or other forms of electrical power supply.

 Ensure that battery replacement is carried out properly. There is a risk of ex-

plosion.

Product Description and Specifications

The

® word mark and logos are registered trademarks owned by Blue-

tooth SIG, Inc. and any use of such marks by Robert Bosch GmbH is under li-

cense.

Intended Use

The GCC 30 TrackTag Professional enables power tools and other objects to be clear-

ly identified via a Bluetooth® signal.

The GCC 30 TrackTag Professional sends out a continuous radio signal, enabling its

location to be determined or other freely configurable data (such as service intervals)

to be ascertained. Bosch offers an app and a web-based application that is appropri-

ate for this purpose.

1 609 92A 19K | (17.7.15)

Bosch Power Tools

Table of Contents